SKU Zanzibar Booth Seating

Zanzibar Booth Seating

View product specification Custom details

Specify upholstery inside Zanzibar’s U-shaped booth and select the finish for the outer walls and plinth.

Your specification

Customize Zanzibar
Finishes
Add measurements
Measurements (cm)
Layout and corners

Start at one end and follow the seating around the U. Enter the first run and the two returns you need.

View quote cart

Discuss my project

Product specifications

Overall dimensions H × W × D (cm)Approx. H 105 × W 250 × D 190 cm
Seat height (cm)Approx. 47 cm
Product weightApprox. 200 kg (preparation estimate; actual weight unverified) Frame construction
Commercial fabric rangeSpecify commercial fabric rated for 35,000–50,000 Martindale cycles. Fabric abrasion
COM / COLAvailable on request. COM (Customer's Own Material) and COL (Customer's Own Leather) options allow full customisation.

Product Details

Seat cushionSedona - Nightfall vinyl
Backrest faceLawaki - Indigo fabric
Outer back / end shellQuarter Sawn White Oak - Driftwood finish
Base / plinthQuarter Sawn White Oak - Driftwood finish
StyleContemporary
Suitable applicationsRestaurant booth seating; Hotel dining areas; Indoor club dining; Cafe booth seating

Materials as pictured

Seat cushion: Sedona - Nightfall vinyl; Backrest face: Lawaki - Indigo fabric; Outer back / end shell: Quarter Sawn White Oak - Driftwood finish; Base / plinth: Quarter Sawn White Oak - Driftwood finish

Finish detailLow-sheen charcoal seats; matte indigo-and-stone backs; low-sheen grey-brown timber grain.
Available colorsView all materials

Care & Maintenance

Care guide

Discuss my project

About Zanzibar Booth Seating

Specify Zanzibar for a hotel dining room with a finish for the outer shell and separate coverings for the patterned back and seats inside the U. As pictured, Zanzibar is complete U-shaped booth seating that combines charcoal Nightfall vinyl seat cushions and indigo polyester blend fabric backs with a gray-brown timber-finished enclosure. The tall enclosing panels form the outer face of the booth in restaurant dining areas.

The booth upholstery varies by component. Low-sheen vinyl covers the seats and the seat boxing. A matte indigo fabric with a pale stone pattern covers the inner backs and padded edge returns. The grain finish is a low-sheen gray-brown and appears on the tall terminal posts, slim top caps, lower rails and plinths, with a riser beneath the rear seats. The high posts and capped shell frame the upholstery on contemporary restaurant booths.

As dining booth seating, the layout sets two opposed returns on either side of an open central entrance, connected by a rear seating run. Four principal seat cushions make up the seating: two long pads on the front returns and two shaped pads at the rear corners. Plain padded backs turn through rounded corners, and the upholstered terminal edges are rounded too. The booth is about 105 cm high, 250 cm wide and 190 cm deep, with a seat height of about 47 cm.

B Seated Global supplies venues in New York. Request a quote.

Request a Render

BSG will prepare and return your render.

* Required

Place in My Space

BSG will place your furniture into your venue photo.

Venue photo
No image selected
JPEG, PNG or WebP, up to 8 MB.

* Required